Blaupunkt CASABLANCA CD52 7 642 285 310 User Manual

Radio / CD  
Casablanca CD52 7 642 295 310  
Heidelberg CD52  
US version  
7 642 285 310  
Operating instructions  
2
6
4
1
3
7
8
9
5
11 10  
13 12  
16 15  
14  
3
CONTROLS  
1
button - unlatches the flip/  
release panel  
:
;
Arrow-key block  
OK button - confirms menu en-  
2
3
Volume control  
tries and starts the scan function  
Button - switches the radio and  
mute function on/off  
<
=
DEQ button (digital equalizer) -  
switches the equalizer on/off  
4
5
RDS button, to switch the RDS  
function on/off (Radio Data Sys-  
tem).  
AUDIO button - adjusts bass,  
treble, X-BASS, balance and  
fader  
FM button, to select the FM ra-  
dio mode source and select the  
FM memory banks  
TS, to start the Travelstore func-  
tion  
>
?
Key block 1 - 6  
AM button, to select the AM ra-  
dio mode source and select the  
AM memory banks  
@
SRC button - selects between  
CD, CD changer/Compact Drive  
MP3 (if connected) and AUX  
sources  
6
7
Display (display field)  
DIS, change display contents  
button - indicates the time on  
the display  
8
9
MENU button - selects the menu  
for basic settings  
button - opens the flip/release  
panel  
4
TABLE OF CONTENTS  
Notes and accessories ............ 6 CD changer mode.................. 18  
Starting CD changer mode............ 18  
Selecting a CD.............................. 18  
Selecting a track ........................... 18  
Flip/release panel .................... 7  
Switching on/off ...................... 8  
Fast search (audible) ..................... 18  
Changing the display ..................... 18  
Repeating individual tracks or  
whole CDs (REPEAT).................... 19  
Random play (MIX) ........................ 19  
Scanning all tracks on all CDs  
(SCAN) ......................................... 19  
Interrupting Play (PAUSE) ............. 19  
Naming CDs ................................. 20  
Volume adjustment .................. 9  
Radio mode............................ 10  
Setting the tuner............................ 10  
Switching to radio mode ................ 11  
Switching the RDS function  
on/off ............................................ 11  
Selecting the waveband /  
memory bank................................. 11  
Tuning into a station....................... 11  
Setting the sensitivity of station  
seek tuning.................................... 11  
Storing stations ............................. 12  
Storing stations automatically  
(Travelstore) .................................. 12  
Listening to stored stations ............ 12  
Scanning receivable stations  
(SCAN) ......................................... 12  
Setting the scantime ...................... 12  
Programme type (PTY) .................. 13  
Optimising radio reception............. 13  
Displaying scrolling text ................. 14  
Setting the display ......................... 14  
CLOCK - Time ........................ 21  
Tone and volume balance ...... 22  
Equalizer ................................ 23  
Notes on adjusting the equalizer .... 23  
Switching the equalizer on/off ........ 24  
Setting the equalizer ...................... 24  
Selecting sound presets ................ 24  
Selecting car presets..................... 24  
Setting the level indicator............... 25  
Setting aid for the equalizer ........... 25  
External audio sources .......... 26  
Technical data ........................ 26  
CD Mode ................................ 15  
Starting CD mode ......................... 15  
Selecting a track ........................... 15  
Quick track selection ..................... 15  
Fast search (audible) ..................... 15  
Random play (MIX) ........................ 16  
Scanning tracks (SCAN) ............... 16  
Repeating a track (REPEAT) .......... 16  
Interrupting play (PAUSE) .............. 16  
Changing the display ..................... 16  
Naming CDs ................................. 17  
Displaying CD text......................... 17  
Removing a CD ............................. 18  
5
NOTES AND ACCESSORIES  
Road safety  
Notes and accessories  
Thank you for deciding to use a Blau-  
punkt product. We hope you enjoy us-  
ing this new piece of equipment.  
Road safety has priority. Only op-  
erate your car radio if road and traf-  
fic conditions allow. Familiarise your-  
self with the unit before setting off on  
your journey.  
You should always be able to hear  
police, fire and ambulance sirens in  
good time. For this reason, set the  
volume of your car radio at a suita-  
ble level.  
Please read these operating instruc-  
tions before using the equipment for  
the first time.  
The Blaupunkt editors are constantly  
working on making the operating in-  
structions clearer and easier to under-  
stand. However, if you still have any  
questions on how to operate the equip-  
ment, please contact your dealer or the  
telephone hotline for your country. You  
will find the telephone numbers printed  
at the back of this booklet.  
Installation  
If you would like to install your car radio  
yourself, please read the installation and  
connection instructions at the end of the  
manual.  
We provide a manufacturer guarantee  
for our products bought within the Eu-  
ropean Union. You can view the guar-  
or ask for them directly at:  
Accessories  
Please use only Blaupunkt-approved  
accessories.  
Remote controls  
Blaupunkt GmbH  
Hotline  
Robert Bosch Str. 200  
The most important functions of your car  
radio can be selected safely and con-  
veniently from the steering wheel using  
the remote controls RC 08, RC 10 or  
RC 10H (available as an optional ex-  
tra).  
D-31139 Hildesheim  
The radio cannot be switched on/off via  
remote control.  
Amplifiers  
All Blaupunkt amplifiers are suitable for  
use with the radio.  
6
FLIP/RELEASE PANEL  
Flip/release panel  
NOTES AND ACCESSORIES  
CD changer  
The following Blaupunkt CD changers  
can be connected to the radio:  
Theft protection  
Your car radio is fitted with a flip/release  
panel to guard against theft. Without this  
panel, the unit is worthless to the thief.  
CDC A 02, CDC A 08 and IDC A 09.  
Compact Drive MP3  
As an alternative to a CD changer, you Protect your unit from theft by taking the  
can connect a Compact Drive MP3 to flip/release panel with you every time  
access MP3 music tracks. If you con- you leave the car. Do not leave the panel  
nect a Compact Drive MP3, you will first behind in the car, even if it is out of sight.  
need to use a computer to store the MP3 The constructive design of the panel  
music tracks on the Microdrivehard makes for simple handling.  
disk inside the Compact Drive MP3.  
Then, when the Compact Drive MP3 is  
Do not drop the flip/release panel.  
connected to the car radio, you can play  
Note:  
Do not expose the flip/release pan-  
el to direct sunshine or other sourc-  
es of heat.  
the tracks like normal CD music tracks.  
The Compact Drive MP3 is operated in  
the same way as a CD changer. Most  
of the CD changer functions can also  
be used with the Compact Drive MP3.  
Keep the flip/release panel in the  
case provided.  
Avoid touching the contacts of the  
flip/release panel. Please clean it  
when necessary with some white  
spirit on a lint-free cloth.  
Amplifier / sub-out  
(only Casablanca CD52)  
The car radio provides connections for  
connecting external amplifiers and a  
subwoofer.  
Removing the flip/release panel  
We recommend you use well-matched  
products from the Blaupunkt or Velocity  
product ranges.  
1
7
FLIP/RELEASE PANEL  
SWITCHING ON/OFF  
Press the  
button 1.  
Switching on/off  
This unlatches the flip/release panel.  
There are various ways of switching the  
car radio on and off, as described be-  
low.  
First pull the flip/release panel  
straight and then to the left out of  
the unit.  
Switching on/off using the ignition  
After removing the flip/release pan-  
If the car radio is correctly connected to  
the ignition and has not been switched  
off using the button 3, it is switched  
on/off simultaneously with the ignition.  
el, the unit switches itself off.  
All the current settings are saved.  
If there is a CD in the unit, it re-  
mains there.  
You can also switch on your car radio  
when the vehicle ignition is off.  
Attaching the flip/release panel  
To do so, press the button 3.  
Slide the flip/release panel from left  
Note:  
to right into the unit guide.  
To protect the vehicle battery, the unit  
switches off automatically after one  
hour.  
Press the left side of the panel into  
the unit until it slots into place.  
Switching on/off using the flip/  
release panel  
Remove the flip/release panel.  
The unit switches itself off.  
Replace the flip/release panel once  
more.  
Note:  
The car radio is switched on. The last  
settings (radio, CD, CD changer/Com-  
pact Drive MP3 or AUX) are activated.  
Do not press against the display  
while attaching the flip/release pan-  
el.  
Switching on/off using the button  
3
If the device was still switched on when  
you removed the control panel, it will  
automatically switch on again with the  
last settings activated (i.e. radio, CD, CD  
changer/Compact Drive MP3 or AUX)  
when the panel is replaced.  
To switch the unit on, press the but-  
ton 3.  
To switch the unit off, hold the but-  
ton 3 down for more than two  
seconds.  
The car radio is now switched off.  
8
VOLUME ADJUSTMENT  
Mute setting  
Volume adjustment  
This feature enables you to lower the  
system volume instantaneously (mute).  
The system volume can be adjusted in  
steps from 0 (off) to 66 (maximum).  
Briefly press button 3.  
MUTEappears on the display.  
To raise the system volume, turn  
the volume control 2 to the right.  
To lower the system volume, turn  
Telephone Audio/Navigation  
Audio  
the volume control 2 to the left.  
Setting the switch-on volume  
If your car radio is connected to a mo-  
bile telephone or a navigation system,  
the volume will be muted as soon as  
you pick upthe telephone or the radio  
relays voice output from the navigation  
system and the conversation or voice  
output is heard through the radio's loud-  
speakers. In order for this to work, the  
mobile telephone or navigation system  
has to be connected to the car radio as  
described in the instructions. For this,  
you need adapter cable Blaupunkt no.  
7 607 001 503.  
You can set the volume at which you  
wish the car radio to play when switched  
on.  
Press the MENU button 8.  
Press the or button : repeat-  
edly until ON VOLUMEappears  
on the display.  
Use the  
buttons : to set the  
switch-on volume.  
If you select LAST VOL, the volume  
played before the unit was last switched  
off will be reactivated.  
To find out which navigation systems are  
compatible with your car radio, please  
consult your Blaupunkt dealer.  
Note:  
To protect your hearing, the maxi-  
mum switch-on volume under the  
LAST VOLsetting is 38. If the  
volume was higher before the unit  
was switched off and LAST VOL”  
has been selected, the volume will  
be set at 38the next time the ra-  
dio is switched on.  
The volume at which telephone conver-  
sations and voice output from the navi-  
gation system are switched on is ad-  
justable.  
Press the MENU button 8.  
Press the button : repeatedly  
until TEL/NAVI VOLappears on  
the display.  
When you have completed setting the  
volume,  
Use the  
buttons : to set the  
desired volume.  
press the MENU button 8.  
When you have completed the set-  
tings, press either the MENU but-  
ton 8 or OK ;.  
9
VOLUME ADJUSTMENT  
RADIO MODE  
Note:  
Radio mode  
You can adjust the volume for telephone  
conversations and voice output while  
they are being heard by using the vol-  
ume control 2.  
This unit is equipped with an RDS radio  
receiver. Many of the receivable FM sta-  
tions transmit a signal that not only car-  
ries the programme but also additional  
information such as the station name  
and programme type (PTY).  
Automatic Sound  
(only Casablanca CD52)  
The station name appears in the dis-  
play as soon as the radio is able to re-  
ceive it and the RDS function is activat-  
ed. You can optionally display the pro-  
gramme type. For further details, please  
read the section entitled Programme  
type (PTY).  
This function adjusts the volume of your  
car radio automatically to your driving  
speed. This requires your device to be  
connected as described in the installa-  
tion guide.  
The automatic volume booster can be  
set in six stages (0-5).  
Setting the tuner  
Press the MENU button 8.  
To ensure that the tuner works proper-  
ly, the device must be configured for  
your region. You can choose between  
Europe (EUROPE) and the USA (N  
AMERICA). By default, the tuner is set  
to the region in which the device was  
sold. If you experience problems with  
radio reception, please check this set-  
ting.  
Press the button : until AUTO  
SOUNDappears in the display.  
Set the volume adjustment with the  
buttons :.  
When the setting process is com-  
plete, press the MENU button 8  
or OK ;.  
Note:  
These operating instructions refer to the  
N AMERICAsetting.  
The right speed-adjusted volume set-  
ting depends on noise levels inside your  
car. Try various values (0-5) until you  
find the best setting.  
Press the MENU button 8.  
Keep pressing the button :  
until TUNER AREAappears in  
the display.  
Press the or button : for  
longer than two seconds to switch  
between EUROPEand N  
AMERICA.  
Press the MENU button 8 or OK  
;.  
10  
RADIO MODE  
Switching to radio mode  
Tuning into a station  
If you are in CD, CD changer/Compact There are various ways of tuning into a  
Drive MP3 or AUX mode,  
station.  
press the FM TS button 5 for FM  
Automatic seek tuning  
radio mode.  
Press the or button :.  
The unit tunes into the next receivable  
station.  
or  
press the AM button ? for AM ra-  
dio mode.  
Tuning into stations manually  
Switching the RDS function on/  
off  
You can also tune into stations manual-  
ly.  
To use the RDS functions, press  
Press the or button :.  
the RDS button 4.  
Note:  
The RDS function is active when RDS  
lights up in the display with a symbol.  
You can only tune into stations manual-  
ly on the FM waveband if the RDS and  
PTY functions are deactivated.  
Selecting the waveband /  
memory bank  
Setting the sensitivity of station  
seek tuning  
You can choose whether to only tune  
into stations with a strong reception or  
to also tune into those with a weak re-  
ception.  
This unit can receive programmes  
broadcast over the FM and AM wave-  
bands. There are three memory banks  
(FM1, FM2 and FMT) for the FM wave-  
band and two memory banks (AM and  
AMT) for the AM waveband.  
Press the MENU button 8.  
Six stations can be stored in each mem-  
ory bank.  
Keep pressing the button : un-  
til SENSappears in the display.  
To switch between the FM memory  
banks,  
Press the button :.  
briefly press the FM TS button 5  
repeatedly until the required mem-  
ory bank appears in the display.  
The display shows the currently set sen-  
sitivity level. SENS 6means that the  
tuner is set to the highest sensitivity  
setting. SENS 1is the lowest setting.  
To switch between the AM memory  
banks,  
Set the required sensitivity using  
the or button :.  
briefly press the AM button ? re-  
peatedly until the required memory  
bank appears in the display.  
11  
RADIO MODE  
When you have finished making your  
changes,  
Listening to stored stations  
Select the memory bank or wave-  
press the MENU button 8 or OK  
band.  
;.  
Press the station button 1 - 6 >  
that corresponds to the station you  
want to listen to.  
Storing stations  
Storing stations manually  
Scanning receivable stations  
(SCAN)  
You can briefly play (scan) all the re-  
ceivable stations. You can set the scan-  
ning time (scantime) to between 5 and  
30 seconds in the menu.  
Select the required memory bank  
(FM1, FM2 or FMT) or the AM  
waveband.  
Tune into the required station.  
Press one of the station buttons 1 -  
6 > for longer than two seconds  
to store the station to that button.  
Starting SCAN  
Keep the OK button ; pressed for  
Storing stations automatically  
(Travelstore)  
longer than two seconds.  
Scanning begins. SCANappears  
briefly in the display followed by a flash-  
ing display of the current station name  
or frequency.  
You can automatically store the six sta-  
tions with the strongest reception in the  
region. The stations are stored in the  
FMT memory bank in FM radio mode  
or in theAMT memory bank inAM radio  
mode.  
Stopping SCAN and continuing  
listening to a station  
Press the OK button ;.  
Note:  
Any stations that were previously stored  
in these memory banks are deleted in  
the process.  
Scanning is stopped and the station that  
was tuned into last will remain active.  
Setting the scantime  
Keep the FM TS button 5  
pressed for longer than two sec-  
onds.  
Press the MENU button 8.  
Keep pressing the button : un-  
til SCANTIMEappears in the dis-  
play.  
The station storing procedure begins.  
TRAVEL-STOREappears in the dis-  
play.After the process is completed, the  
station stored in location 1 of the FMT  
or AMT memory bank will be played.  
Set the required scantime using  
the or buttons :.  
When you have finished making  
your changes, press the MENU  
button 8 or OK ;.  
12  
RADIO MODE  
Note:  
If you want to select another pro-  
gramme type, you can do so by  
pressing the or button :  
whilst this display is visible.  
The set scantime also applies to scan-  
ning in CD mode but not to scanning in  
CD changer mode.  
Or  
Programme type (PTY)  
Press one of the buttons 1 - 6 >  
to select a programme type that is  
stored on one of these buttons.  
Besides transmitting the station name,  
some FM stations also provide informa-  
tion on the type of programme that they  
are broadcasting. Your radio can receive  
and display this information.  
The selected programme type is dis-  
played briefly.  
For example, the programme types can  
be:  
Press the or button : to start  
seek tuning.  
ROCK  
CLS_ROCK TOP_40  
COUNTRY OLDIES  
The next station corresponding to your  
selected programme type will then be  
tuned into.  
ADLT_HIT  
SOFT_RCK SPORTS  
TALK  
Using the PTY function, you can direct-  
ly select stations of a particular pro-  
gramme type.  
Storing a programme type on a  
station button  
Select a programme type using the  
or button :.  
Switching PTY on/off  
Keep the required station button  
1 - 6 > pressed for longer than  
two seconds.  
Press the MENU button 8.  
Keep pressing the or button  
: until PTY ONor PTY OFF”  
appears in the display.  
The programme type is now stored on  
the selected button 1 - 6 >.  
Press the or button : to  
switch PTY ON or OFF.  
Optimising radio reception  
When PTY is switched on, PTY lights  
up in the display.  
Treble reduction feature during  
interference (HICUT)  
Press the MENU button 8 or OK  
The HICUT function improves reception  
during poor radio reception (only FM).  
If interference occurs, the treble is au-  
tomatically reduced thus reducing the  
interference level.  
;.  
Selecting a programme type and  
starting seek tuning  
Press the or button :.  
The current programme type appears  
in the display.  
Switching HICUT on/off  
Press the MENU button 8.  
13  
RADIO MODE  
Keep pressing the button : un- Displaying scrolling text  
til HICUTappears in the display.  
Some radio stations use the RDS sig-  
nal to transmit advertising or other in-  
formation instead of their station name.  
These scrolling texts appear in the dis-  
play.  
Press the or button : to ad-  
just HICUT.  
HICUT 0means that no reduction will  
be made, HICUT 3means a maximum  
automatic reduction of the treble and  
interference level will be applied.  
You can deactivate the scrolling text”  
display for stations that you have stored  
on the station buttons.  
Press the MENU button 8 or OK  
Keep the RDS button 4 pressed  
until NAME FIXappears in the  
display.  
;.  
Switching bandwidth during  
interference (SHARX)  
To allow scrolling texts to appear in  
the display again, keep the RDS  
button 4 pressed until NAME  
VARappears in the display.  
The SHARX function allows you to  
largely avoid interference caused by  
neighbouring radio stations (FM only).  
Switch on the SHARX function if you  
experience a high radio station density.  
Note:  
If you tune into an already stored sta-  
tion using a different means (e.g. using  
SCAN or by searching), the scrolling  
textswill be displayed.  
Switching SHARX on/off  
Press the MENU button 8.  
Keep pressing the button :  
until SHARXappears in the dis-  
play.  
Setting the display  
When in radio mode, you have the op-  
tion of continuously displaying the time  
or continuously displaying the station  
name or frequency.  
Press the or button : to  
switch SHARX on/off.  
SHARX OFFmeans automatic band-  
width switching is deactivated, SHARX  
ONmeans it is activated.  
Keep the DIS  
button 7  
pressed until the required display  
appears.  
Press the MENU button 8 or OK  
;.  
14  
CD MODE  
Close the panel using light pres-  
CD Mode  
You can use this unit to play standard  
CDs with a diameter of 12 cm.  
sure until you feel it latch into place.  
CD playback begins.  
If there is already a CD in the drive,  
CD-Rs and CD-RWs (CDs that you  
have burnedyourself) can generally  
also be played. Due to the varying qual-  
ity of CDs, Blaupunkt cannot guaran-  
tee that this will work properly.  
press the SRC button @ repeated-  
ly until CDappears on the dis-  
play.  
Playback begins from the point at which  
it was last interrupted.  
To ensure the system functions proper-  
ly, only use CDs labelled with the com-  
pact disc logo. Problems might be ex-  
perienced when trying to play copy-pro-  
tected CDs. Blaupunkt cannot guaran-  
tee the proper functioning of copy-pro-  
tected CDs!  
Selecting a track  
Press one of the buttons on the ar-  
row block : to select the next or  
previous track.  
If the or button : is pressed once,  
the current track is played again from  
the beginning.  
Risk of damage to CD drive!  
Single CDs with a diameter of 8 cm  
and CDs which are not circular  
(shape CDs) should not be used.  
We accept no liability for any dam-  
age to the CD drive that may occur  
as a result of the use of unsuitable  
CDs.  
Quick track selection  
To quickly select tracks backwards or  
forwards,  
keep one of the  
buttons :  
pressed until fast reverse / forward  
track selection begins.  
Starting CD mode  
Fast search (audible)  
For a fast search backwards or forwards  
If there is no CD in the drive,  
Press the button 9.  
The flip/release panel opens.  
keep the  
buttons : pressed  
until the fast search backwards or  
Gently insert the CD into the CD  
compartment with the printed side  
uppermost until you feel some re-  
sistance.  
forwards begins.  
The CD will be drawn into the drive.  
Do not hinder or assist the drive as it  
draws the CD in.  
15  
CD MODE  
Random play (MIX)  
Repeating a track (REPEAT)  
Press the button 5 MIX >.  
MIX CDappears briefly on the display,  
If you would like to repeat a track,  
press button 4 RPT >.  
the MIX symbol lights up. The next track REPEATTRCKappears briefly on the  
played will be randomly selected.  
display, the RPT symbol lights up. The  
track is then repeated until RPT is de-  
activated.  
Stopping MIX  
Press the button 5 MIX > once  
Stopping REPEAT  
again.  
If you would like to end repeat,  
press the button 4 RPT > once  
again.  
MIX OFFappears briefly on the dis-  
play, the MIX symbol goes out.  
Scanning tracks (SCAN)  
You can briefly listen in to all the tracks  
on a CD.  
REPEAT OFFappears briefly on the  
display, the RPT symbol goes out. Nor-  
mal playback is resumed.  
Hold down the OK button ; for  
more than two seconds. The next  
track starts to play.  
Interrupting play (PAUSE)  
Press the button 1 >.  
PAUSEappears on the display.  
Note:  
The scanning time is adjustable. Read  
about setting the scanning time in the  
section Setting the scanning timein  
the chapter Radio mode.  
Ending Pause  
Press the button 1 > during the  
pause.  
Play then resumes.  
Stopping SCAN and continuing  
playback  
Changing the display  
To alter the display between track  
number and time or track number  
and playing time or track number  
Press the OK button ; to end  
scanning.  
The current track will then continue to  
play.  
and CD name, press the DIS  
button once or several times for  
more than two seconds until the  
desired elements appear on the  
display.  
7
16  
CD MODE  
Naming CDs  
Hold down the MENU button 8. A  
beep sounds at the end of four  
seconds and DELETE NAMEap-  
pears on the display.  
To make it easier for you to recognise  
your CDs, the car radio offers an indi-  
vidual name option for 30 CDs. The  
names should have a maximum of eight  
digits. If you attempt to allocate more  
than 30 names, FULLwill appear on  
the display.  
Release the MENU button 8.  
The CD name is now deleted.  
Press the OK button ; to return to  
the menu.  
Entering/altering CD names  
Listen to the desired CD.  
Press the MENU button 8.  
Displaying CD text  
Some CDs feature so-called CD text.  
The CD text may include the name of  
the performer, the album and the track  
name.  
Use the  
CD NAME.  
buttons : to select  
You can have the CD text displayed as  
running text at every change of track.  
After the CD text has been displayed  
once, the standard display is used.  
Please see the section Changing the  
display. If the CD in the player contains  
no CD text, NO TEXTwill appear on  
the display when the CD text function is  
activated.  
Press the or button : twice.  
You are now in the edit mode. If the CD  
you have selected is still unnamed, eight  
underlines appear on the display.  
The current input position flashes.  
Use the  
buttons : to select  
your characters. If a position is left  
blank, you have selected the un-  
derline.  
Switching CD text on/off  
Use the or button : to pro-  
Press the MENU button 8.  
ceed to your next input position.  
Press the button : repeatedly  
until CD TEXTappears on the  
display.  
Press the MENU button 8 or OK  
; to save the name entered.  
Switch on the CD text function by  
Clearing a CD name  
pressing the  
buttons :  
Listen to the CD whose name you  
(CD TEXT ON) or off (CD TEXT  
OFF).  
wish to clear.  
Press the MENU button 8.  
When you have completed the set-  
ting procedure, press the MENU  
button 8 or OK ;.  
Use the  
CD NAME.  
Press the or button :.  
buttons : to select  
17  
CD MODE  
CD CHANGER MODE  
Removing a CD  
CD changer mode  
Press the  
button 9.  
Note:  
Information on handling CDs, inserting  
CDs and operating the CD changer can  
be found in the operating instructions  
accompanying your CD changer.  
The flip/release panel opens to the front  
and the CD is ejected.  
Carefully remove the CD and close  
the flip/release panel.  
Starting CD changer mode  
Press the SRC button @ repeat-  
edly until CHANGERappears on  
the display.  
Playback begins with the first CD the  
CD changer recognises.  
Selecting a CD  
To change up or down to a different  
CD, press the or button :  
once or several times.  
Selecting a track  
To move up/down from one track to  
another on the current CD,  
press the or button : once or  
several times.  
Fast search (audible)  
For a fast search backwards or forwards  
keep the  
buttons : pressed  
until the fast search backwards or  
forwards begins.  
Changing the display  
To alter the display between track  
number and playing time or track  
number and time or track number  
and CD number or track number  
and CD name, press the DIS  
7
button once or several times for  
18  
CD CHANGER MODE  
more than two seconds until the  
desired elements appear on the  
display.  
Stopping MIX  
Press the button 5 MIX > until  
MIX OFFappears briefly on the  
display and MIX goes out.  
Repeating individual tracks or  
whole CDs (REPEAT)  
Scanning all tracks on all CDs  
(SCAN)  
To listen in briefly to all the tracks  
on all inserted CDs in ascending  
order, hold down the OK button ;  
for more than two seconds.  
To repeat the current track, press  
the button 4 RPT > briefly.  
REPEATTRCKappears briefly on the  
display and RPT lights up.  
To repeat play of the entire CD,  
press the button 4 RPT > once  
again.  
SCANappears on the display.  
Stopping SCAN  
REPEAT DISCappears briefly on the  
display and RPT lights up.  
To stop scanning, press the OK  
button ; briefly.  
Stopping REPEAT  
The track currently being scanned then  
continues play.  
To stop the repeat function for the  
current track or CD,  
Interrupting Play (PAUSE)  
Press the button 1 >.  
PAUSEappears on the display.  
press the button 4 RPT > repeat-  
edly until REPEAT OFFappears  
briefly on the display and RPT  
goes out.  
Ending Pause  
Random play (MIX)  
Press the button 1 > during the  
pause.  
To play the tracks on the current  
CD in random order, press the but-  
ton 5 MIX >.  
Play then resumes.  
MIX CDappears briefly on the display  
and MIX lights up.  
To play the tracks of all the inserted  
CDs in random order, press the  
button 5 MIX > once again.  
MIX ALLappears briefly on the dis-  
play and MIX lights up.  
19  
CD CHANGER MODE  
Naming CDs  
Use the  
buttons : to select  
CDC NAME.  
To make it easier for you to recognise  
your CDs, the car radio offers an indi-  
vidual name option for 99 CDs. The  
names should have a maximum of sev-  
en digits.  
If you attempt to allocate more than 99  
names, FULLwill appear on the dis-  
play.  
Press the or button :.  
Hold down the MENU button 8. A  
beep sounds at the end of four sec-  
onds and DELETE NAMEap-  
pears on the display.  
Release the MENU button 8.  
The CD name is now deleted.  
Entering/altering CD names  
Press the OK button ; to return to  
Press the MENU button 8.  
the menu.  
Use the  
buttons : to select  
Clearing all CD names  
CDC NAME.  
All CD names saved are deleted.  
Listen to a CD.  
Press the or button :.  
The name of the CD appears on the  
display.  
Press the MENU button 8.  
Press the or button :.  
Use the  
buttons : to select  
CDC NAME.  
You are now in the edit mode. If the CD  
you have selected is still unnamed, sev-  
en underlines appear on the display.  
Press the or button :.  
Hold down the MENU button 8.  
A beep sounds at the end of four  
seconds and DELETE NAMEap-  
pears on the display.  
The current input position flashes.  
Use the  
buttons : to select  
your characters. If a position is left  
blank, you have selected the un-  
derline.  
Continue to hold down the MENU  
button 8 until a second beep  
sounds and DELETE ALLap-  
pears on the display.  
Use the or button : to pro-  
ceed to your next input position.  
Release the MENU button 8.  
All CD names in the CD changer are  
now deleted.  
Press the MENU button 8 or OK  
; to save the name entered.  
Clearing a CD name  
Press the OK button ; to return to  
Listen to the CD whose name you  
the menu.  
wish to clear.  
Press the MENU button 8.  
20  
CLOCK - TIME  
The time appears on the display. The  
minutes flash and can now be set.  
CLOCK - Time  
Briefly displaying the time  
Set the minutes using the  
but-  
Press the DIS  
7 button briefly  
tons :.  
to display the time.  
Once the minutes have been set,  
press the button :. The hours  
now flash.  
Setting the time  
The time can be set automatically us-  
ing the RDS signal. If you are unable to  
receive an RDS station or the station  
you are listening to does not support this  
function, it is also possible for you to set  
the clock manually.  
Set the hours using the  
but-  
tons :.  
Press the MENU button 8 or OK  
; once you have completed the  
setting.  
Setting the time automatically  
Selecting the 12/24-hour clock  
mode  
To set the time automatically, press  
the MENU button 8.  
Press the MENU button 8.  
MENUappears on the display.  
Press the button : repeatedly  
until CLK MANUAL(manual) or  
CLK AUTO(automatic) appears  
on the display.  
Press the button : repeatedly  
until 24 H MODEor 12 H MODE”  
appears on the display.  
Press the button : until CLK  
Press the  
buttons : to switch  
between the 12 and 24-hour mode.  
AUTOappears on the display.  
Press the MENU button 8 or OK  
; once you have completed the  
setting.  
Press the MENU button 8 or OK  
; once you have completed the  
setting.  
As soon as a station with the RDS time  
function (RDS-CT) is received, the clock  
is set automatically.  
Setting the time manually  
To set the time manually, press the  
MENU button 8.  
Press the button : repeatedly  
until CLOCKSETappears on the  
display.  
Press the button :.  
21  
TONE AND VOLUME BALANCE  
Setting the X-BASS  
Tone and volume balance  
X-BASS means that the bass is raised  
to a comfortable level at lower volume  
levels. You can adjust the X-BASS func-  
tion individually for all audio sources.  
When X-BASS is activated, the X-BASS  
symbol lights up on the display.  
You can adjust the sound settings for  
each source separately (radio, CD, CD  
changer/Compact Drive MP3 andAUX).  
Adjusting the bass  
Press the AUDIO = button.  
BASSappears on the display.  
Press the AUDIO button =.  
BASSappears on the display.  
Press the or button : to set  
the bass.  
Press the button : repeatedly  
until X-BASSappears on the dis-  
play.  
Press the AUDIO button = or OK  
; once you have completed the  
setting.  
Press the or button : to se-  
lect X-BASS.  
Adjusting the treble  
XBASS 0means that X-BASS is  
switched off.  
Press the AUDIO = button.  
BASSappears on the display.  
After completing the setting, press  
Press the button : repeatedly  
until TREBLEappears on the dis-  
play.  
the AUDIO button = or OK ;.  
Setting the volume distribution  
left/right (balance)  
Press the or button : to set  
To set the volume distribution left/  
right (balance), press the AUDIO  
= button.  
the treble.  
Press the AUDIO button = or OK  
; once you have completed the  
setting.  
BASSappears on the display.  
Press the button : repeatedly  
until BALANCEappears on the  
display.  
Press the or button : to set  
the volume distribution left/right.  
Press the AUDIO button = or OK  
; once you have completed the  
setting.  
22  
TONE AND VOLUME BALANCE  
EQUALIZER  
Setting the volume distribution  
front/rear (fader)  
Equalizer  
This car radio is fitted with five parametric  
digital equalizers, which can be set indi-  
vidually. This means you have the means  
to save and request different equalizer  
settings for different situations (eg only  
driver, driver and front passenger or vehi-  
cle occupants in front and back).  
Parametricmeans that for each of the  
five filters, one frequency can be individ-  
ually raised or lowered (GAIN +8 to  
-8). The following filters are available:  
To set the volume distribution front/  
rear (fader), press the AUDIO =  
button.  
BASSappears on the display.  
Press the button : repeatedly  
until FADERappears on the dis-  
play.  
Press the or button : to set  
the volume distribution front/rear.  
SUB LOW EQ 32 - 50 Hz  
Press the AUDIO button = or OK  
; once you have completed the  
setting.  
LOW EQ  
63 - 250 Hz  
MID EQ  
315 - 1250 Hz  
MID/HIGH EQ 1600 - 6300 Hz  
HIGH EQ 8000 - 12500 Hz  
These filters can be set without meas-  
uring equipment. This means that the  
sound quality inside the vehicle can be  
greatly influenced.  
Presets for different car models (CAR  
PRESETS) and musical styles (SND  
PRESETS) can also be selected.  
Notes on adjusting the equalizer  
We recommend you use a CD you are fa-  
miliar with when adjusting the equalizer.  
Before adjusting the equalizer, set the  
tone and volume balance to zero. To do  
this, please see the chapter Tone and  
volume balance.  
Listen to the CD.  
Evaluate the tone impression ac-  
cording to your taste.  
Now consult the chart An aid to  
adjusting the equalizerin the  
Sound impressionsection.  
23  
EQUALIZER  
CLASSIC  
POP  
Set the equalizer values as de-  
scribed under What to do.  
JAZZ  
Switching the equalizer on/off  
ROCK  
To switch on the equalizer, hold  
down the DEQ button < until EQ  
lights up on the display EQ ONis  
briefly displayed.  
TECHNO  
SPEECH  
Settings for these musical styles have  
already been programmed.  
To switch on the equalizer, hold  
down the DEQ button < until EQ  
disappears from the display EQ  
OFFis briefly displayed.  
Press the DEQ button <.  
Press the or button : repeat-  
edly until SND PRESETSap-  
pears on the display.  
Setting the equalizer  
Select the desired musical style by  
Press the DEQ button <.  
pressing the or button :.  
Select DIGITAL EQusing the  
Press the DEQ button  
<
or OK ;.  
or button :.  
Selecting car presets  
Sound presets can also be selected for  
the following types of vehicle.  
Select the equalizer USER EQ1,  
USER EQ2or USER EQ3,  
which you would like to set by  
pressing the or the button :.  
COMPACT  
LIMOUSINE  
VAN  
Select the filter using the or  
button :.  
Press the or button :.  
ROADSTER  
MINI  
To select the frequency, press the  
or button :.  
TRUCK  
Set the level using the or but-  
Settings have already been pro-  
grammed for these types of vehicle.  
ton :.  
To select the next filter, first press  
the OK button ;, then the or  
button :.  
Press the DEQ button <.  
Press the or button : repeat-  
edly until CAR PRESETSap-  
pears on the display.  
When all the settings have been se-  
lected, press the DEQ button <.  
Select the desired sound preset by  
pressing the or button :.  
Selecting sound presets  
Press the DEQ button  
<
or OK ;.  
Sound presets can also be selected for  
the following music styles  
24  
EQUALIZER  
Selecting a spectrometer type  
Setting the level indicator  
The level indicator (spectrometer) on Press the MENU button 8.  
your display briefly indicates the volume,  
tone and equalizer settings with sym-  
bols on your display as you make the  
corresponding settings.  
MENUappears on the display.  
Press the button : repeatedly  
until EQ DISPLAYappears on the  
display.  
When settings are not being made, the  
spectrometer indicates the original lev-  
el of the car radio.  
You can also set the type of spectro-  
meter on your menu.  
Press the or button :, to se-  
lect between displaying SPEC-  
TRUM 1and SPECTRUM 2or  
EQ DISP OFF.  
There are two types available.  
Press the MENU button 8 or OK  
; once you have completed the  
setting.  
Setting aid for the equalizer  
Commence settings at mid and treble section and complete them in the bass  
section.  
Sound impression/problem  
What to do  
Bass reproduction too weak  
Raise bass with  
frequency: 50 to 100 Hz,  
level: +4 to +6  
Impure bass  
Booming  
Disagreeable pressure  
Reduce lower mid-section with  
frequency: 125 to 400 Hz,  
level: approx. -4  
Sound very dominant,  
aggressive, no stereo effect  
Reduce mid-section with  
frequency: 1,000 to 2,500 Hz,  
level: -4 to -6  
Muffled reproduction  
Low transparency  
No instrumental brilliance  
Raise tweeter range with  
frequency: approx. 12,600 Hz,  
level: +2 up to +4  
25  
EXTERNAL AUDIO SOURCES  
External audio sources  
TECHNICAL DATA  
Technical data  
In addition to the CD changer, you can  
also connect up a different external au-  
dio source with a line output. Such  
sources can be, for example, portable  
CD players, minidisc players or MP3  
players.  
If there is no CD changer connected to  
your unit, two external audio sources  
can be hooked up.  
Amplifier  
Output power:  
4 x 26 watts sine  
in accordance  
with DIN 45 324 at  
14.4V,  
4 x 50 watts max.  
power  
The AUX output has to be switched on  
in the install menu.  
To connect up an external audio source,  
you will need an adapter cable, obtain-  
able from any authorised Blaupunkt  
dealer.  
Tuner  
Frequency ranges:  
FM :  
87.5 - 107,9 MHz  
530 - 1 710 kHz  
AM :  
FM transmission range:  
20 - 16 000 Hz  
Switching the AUX input on/off  
Press the MENU button 8.  
MENUappears on the display.  
CD  
Press the button : repeatedly  
until AUX-IN-1 OFFor AUX-IN-1  
ONappears on the display.  
Transmission range:  
15 - 20 000 Hz  
For the second AUX input, a 2will be  
displayed instead of a 1. If a CD chang-  
er is connected, only input 2will be  
available.  
Pre-amp output  
4 channels:  
4 V  
Input sensitivity:  
Press the or button : to  
AUX 1 input  
: 2 V / 6 k  
switch AUX on or off.  
AUX 2 input  
: 775 mV / 10 kΩ  
Press the MENU button 8 or OK  
; once you have completed the  
setting.  
Tel/Navi reception : 10 V / 560 Ω  
Note:  
When the AUX input is switched on, it  
can be selected using the SRC button  
@.  
Subject to changes!  
26  
Service numbers / Numéros du service après-vente /  
Números de servicio / Número de serviço  
Country:  
Phone:  
Fax:  
WWW:  
Germany  
(D)  
0180-5000225  
05121-49 4002  
Austria  
(A)  
(B)  
01-610 390  
02-525 5454  
01-610 393 91  
02-525 5263  
44-898 644  
09-435 99236  
01-4010 7320  
01-89583 8394  
Belgium  
Denmark  
Finland  
France  
(DK) 44 898 360  
(FIN) 09-435 991  
(F)  
01-4010 7007  
Great Britain (GB) 01-89583 8880  
Greece  
Ireland  
Italy  
(GR) 0030 210 57 85 350 0030 210 57 69 473  
(IRL) 01-4149400  
01-4598830  
02-369 6464  
40 2085  
(I)  
02-369 6331  
40 4078  
Luxembourg (L)  
Netherlands (NL) 023-565 6348  
023-565 6331  
66-817 157  
01-2185 11111  
916-467952  
08-7501810  
01-8471650  
Norway  
Portugal  
Spain  
(N)  
(P)  
(E)  
(S)  
66-817 000  
01-2185 00144  
902-120234  
08-7501500  
Sweden  
Switzerland (CH) 01-8471644  
Czech. Rep. (CZ) 02-6130 0441  
02-6130 0514  
01-324 8756  
022-8771260  
Hungary  
(H)  
01-333 9575  
Poland  
(PL) 0800-118922  
(TR) 0212-3350677  
(USA) 800-2662528  
Turkey  
USA  
0212-3460040  
708-6817188  
Brasil  
(Mercosur)  
(BR) +55-19 3745 2769 +55-19 3745 2773  
Malaysia  
(Asia Pacific) (MAL) +604-6382 474  
+604-6413 640  
Blaupunkt GmbH  
10/03  
CM/PSS 8 622 403 158  

Canon 514XL S User Manual
Canon XL1 3CCD User Manual
Datexx ECO CALC DH 21 User Manual
Gitzo G1257LVL User Manual
Hypertec Dicota Luggage N14508NHY User Manual
JBL GT5 0c User Manual
JBL Power Series P6462 User Manual
Jensen Phase Linear CD1211 User Manual
JVC Car Speaker CS GW1000 User Manual
JVC GR SXM480A User Manual